HAND HELD SIREN AMPLIFIER AND LIGHT CONTROLLER P/N:S-CONT001

• 100W Hand-Held Remote Siren.
• Hand Held Siren Amplifier and Light Controller. 
• ECE R10 EMC safety compliance
• 4 x 0.2 amp Auxiliary power outputs.
• 4 Tones, 3 Modes Siren, Radio and Microphone. 
• Full Electrical Settings with Volume Adjustable.
• Siren Input Current: 10 Amps (@13.6VDC - single 100W speaker)
• Siren Standby Current: Less than 150mA
• Audio Frequency: 200Hz - 10kHz ± 3db
• Audio Output: 40 watts (@13.6VDC-single 100W speaker)
• Siren Output Power: 100 WATTS RMS MAX. (14VDC - single 100W speaker)
• Output Load: Single 11 Ohm Speaker
• Siren Frequency: 725Hz - 1465Hz
• Operating Temp: -25°C to 60°C (-15°F to + 140°F)
• Light Controls: 4 - on/off lighted push-button switches with replaceable legends.
• Light Output Ratings: Built-in 0.2A fuse on each of the 4 outputs.
• Tones: Horn: Composite (Constant). Wail: 12CPM. Yelp: 190CPM. Phaser: 650CPM. HILO: 60CPM.
• Size: Siren Amplifier 161mm x 178mm x 69mm | Controller: 56mm x 140mm x 33mm

 

Siren Controls:

 

• 3 push-button Mode switch (SIREN, RADIO, PA).
• Momentary push-button Horn switch.
• Momentary push-button Manual/Tone toggle switch.•IGN (Ignition) Input Connection.
• HORN Input Connection.

 

 

Siren Connections:

 

• SW1, SW2, SW3, SW4 (Light), +VDC, -GND, IGN (Ignition),
• RAD (Radio) x2, HORN (Horn Ring Transfer), SPK x2